Black Box LIE1014A network switch Managed Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE)

SKU
LIE1014A
In stock
$1,295.26 $1,079.38
-
+
Overview
INDRy II M
DETAILS

- Economical switch delivers features normally found in more expensive switches.
- PoE 802.3af and PoE+ 802.3at compatible. Delivers up to 30W per port.
- SFP ports enable single-mode or multimode Gigabit fiber uplinks over long distances.
- Rated for extreme temperatures of -40 to +75° C.
- Dual DC power inputs for redundancy.
- IP30-rated housing is also rated for shock and vibration protection.
- Manage through a Web interface, SNMP, or command-line interface (CLI).
- Features bandwidth rate control, traffic prioritization, and quality of service.
- DIN rail or wall mount.
- Features bandwidth rate control, traffic prioritization, and quality of service.

PoE+ and SFP ports for flexibility.

This switch has eight 10/10/1000-Mbps PoE/PoE+ copper ports and four SFP ports for uplinks. This way you can power distant access points, security cameras, and other industrial equipment over the copper Ethernet lines at the far edges of your network where it's impractical to run electrical wires. The SFP fiber uplinks give you almost unlimited fiber distance options, depending on the SFP.

Maximize uptime.

Advanced management features help minimize network downtime by enabling you to remotely diagnose and manage network problems. And you'll eliminate the need to send IT technicians on site—thus lowering costs. The switch is fully manageable through SNMP, a Web browser, Telnet, or a console port. Control the bandwidth on each port individually and set up Quality of Service (QoS) priority queuing for critical applications. The switch supports port-based VLAN and IEEE 802.1Q VLAN tagging, MAC-based trunking, IP-multicast IGMP snooping, rapid spanning tree for redundancy. Plus, it has 802.1x port-based authentication for security.

Fast failovers.

The switch gives you maximum network flexibility: Spanning Tree Protocol (STP/RSTP), Link Aggregation Control Protocol, and a ring protocol. It offers a 20 millisecond or less failover.

Extreme applications.

Encased in an IP30-rated metal case, this switch withstands extreme temperatures from -40°C to +75°C (-40° F to +167° F). Use it for:
- Security and surveillance, particularly to backhaul IP security camera data.
- Military applications, especially in ships and other vehicles.
- Factory automation for controlling machinery, PLCs, motor drives, sensors, counters, inspection cameras, and packaging equipment.
- Oil and gas fields or remote equipment monitoring and control.
- Building automation for controlling HVAC and lighting systems.

Installation options.

The switch features redundant power inputs and includes DIN-rail and panel-mount kits. The power supplies (MDR-40-48 and SDR-240-48) are sold separately. The switch also includes a serial cable (RJ-45/DB9) for the console connection.
More Information
SKU LIE1014A
EAN 0822088079620
Specification
Management features
Multicast supportYes
Traffic shapingYes
Switch typeManaged
Quality of Service (QoS) supportYes
MIB supportFC 1757 RMON 1,2,3,9; RFC 2674 Q-Bridge MIB; RFC-1213 MIB-II; RFC-1493 Bridge MIB; RFC 2233 IF MIB
Network
IGMP snoopingYes
Networking standardsIEEE 802.1D, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3x
Full duplexYes
Spanning tree protocolYes
Number of VLANs256
Link aggregationYes
Flow control supportYes
Auto MDI/MDI-XYes
10G supportNo
Auto-negotiationYes
Virtual LAN features
Number of VLANs256
Data transmission
Number of VLANs256
Jumbo frames9000
MAC address table8000 entries
Store-and-forwardYes
Jumbo frames supportYes
Performance
Auto-negotiationYes
Buffer size512 KB
Harmonized System (HS) code85176990
Technical details
Product colourBlack
Rack mountingNo
Ports & interfaces
SFP module slots quantity4
Basic switching RJ-45 Ethernet ports quantity8
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Console portRJ-45
Security
Security algorithmsHTTPS, SSH
IGMP snoopingYes
DHCP featuresDHCP server, DHCP client
Multicast features
Multicast supportYes
Certificates
CertificationCE; EMS: FCC Part 15, CISPR 22 (EN55022) Class A; IEC61000-4-2, -3, -4, -5, -6 (Level 3), IEC68-2-6, -27, -32: RoHS/WEEE: RoHS, WEEE
Design
Wall mountableYes
International Protection (IP) codeIP30
DIN rail mountingYes
Product colourBlack
LED indicatorsYes
CertificationCE; EMS: FCC Part 15, CISPR 22 (EN55022) Class A; IEC61000-4-2, -3, -4, -5, -6 (Level 3), IEC68-2-6, -27, -32: RoHS/WEEE: RoHS, WEEE
Rack mountingNo
Indication
LED indicatorsYes
Power
Power consumption (max)15 W
Redundant power supply (RPS) supportYes
Power over Ethernet (PoE)
Power over Ethernet (PoE)Yes
Operational conditions
Storage temperature (T-T)-40 - 85 °C
Operating temperature (T-T)-40 - 75 °C
Operating relative humidity (H-H)5 - 95%
Weight & dimensions
Width3.03" (77 mm)
Depth5.04" (128 mm)
Height6.06" (154 mm)
Weight3.09 lbs (1.4 kg)
Logistics data
Harmonized System (HS) code85176990
Manufacturer Black Box
In Stock Y
Write Your Own Review
You're reviewing:Black Box LIE1014A network switch Managed Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE)
Search engine powered by ElasticSuite